QSC KW152 Active PA Speaker, 1000 Watt
0

Your Cart is Empty




QSC

Available To Order

financing available

From £23.83 per month

  • 15" two-way, 1000W, 60° axisymmetric, active loudspeaker.
      • 15” Woofer; 1.75” diaphragm compression driver
      • 60° conical DMT coverage
      • Maximum SPL 133 dB peak
      • 1000 watt Class D power modules in all models (2 x 500 W continuous)
      • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
      • Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
      • DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
      • Rugged, texture-painted birch enclosures
      • Four-position Mic/Line gain (full-range models)
      • Tour-grade 16 gauge steel grilles
      • Comfortable ergonomic handles
      • 35 mm pole sockets with Tilt-Direct™
      • M10 rigging points for suspended installation

    DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
    Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
    Specifications:

    • Configuration: 15" 2-way multipurpose
    • Transducers: 15" cone transducer, 1.75" diaphragm compression driver
    • Frequency Response (-6 dB): 47Hz - 18kHz
    • Frequency Range (-10 dB): 44Hz - 20kHz
    • Nominal Coverage (-6 dB): 60° axisymmetric
    • Maximum SPL: 133 dB peak
    • Power Output: 1000W Class D (500W LF, 500W HF) continuous, 2000W peak
    • Controls: Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
    • Indicators: Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
    • Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
    • Cooling: On demand, 50 mm variable speed fan
    • Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
    • Transducer Protection: Thermal limiting, excursion limiting
    • AC Power Input: Universal power supply 100-240 VAC, 50 to 60 Hz
    • AC Power Consumption (1/8 Power):
    • 100 VAC, 2.3 A
    • 120 VAC, 2.01 A
    • 230 VAC, 1.13 A
  • Input Impedance:
    • Channel A (0dB gain): 38kΩ balanced, 19kΩ unbalanced
    • Channel A (+12dB gain): 10kΩ balanced, 5kΩ unbalanced
    • Channel A (+24dB gain): 2.66kΩ balanced, 1.33kΩ unbalanced
    • Channel A (+36dB gain: 660Ω balanced, 330Ω unbalanced
    • Channel B XLR/¼" 38kΩ balanced, 19kΩ unbalanced
    • Channel B RCA: 10kΩ
  • Enclosure:
    • Material: 15mm painted birch plywood
    • Finish: Black textured paint
    • Grille: Black powder coated 16 gauge steel
    • Dimensions: 32.1" x 17.5" x 15.2" / 816 mm x 445 mm x 386 mm