Shure PG Wireless Vocal System with PG58 (Analogue)
Entry Shure vocal microphone combined with simple setup and an intuitive interface for performance you can trust
Shure BLX24UK/PG58 Specification:
Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
Audio Range: 50–15,000 Hz (dependent on microphone type)
Transmitter RF Output Power: 10 mW, typical (varies by region)
Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
Battery Life: Up to 14 hours
Dynamic Range: 100 dB A-weighted
System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
BLX4: 12–18 V DC at 150 mA, supplied by external power supply
Shure BLX24UK/PG58 Additional Overview:
Entry point to professional Shure quality, ruggedness and sound.
PG58 Vocal Microphone:
Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
Cartridge includes a neodymium magnet for high output level.
Internal shock mount for reduced handling noise.
Durable metal construction.
On/off switch for onstage control.
Hardened steel mesh ball grille that resists wear and abuse.
Integral "pop" filter reduces explosive breath sounds and wind noise.
Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.
BLX2 Handheld Transmitter:
Power and battery status LED
Adjustable gain control
Quick and easy frequency matching
AA batteries (included) provide up to 14 hours of continuous use
100 m (300 ft.) operating range (line of sight)
Up to 12 compatible systems (region dependent)
Microprocessor-controlled internal antenna diversity
One touch QuickScan locates the best open frequency
¼" and XLR audio outputs
Two color audio status indicator LED
BLX4 Receiver - Output Impedance:
XLR connector 200 Ω
6.35 mm (1/4") connector: 50 Ω
Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
XLR connector –27 dBV (into 100 kΩ load)
6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
RF Sensitivity: 105 dBm for 12 dB SINAD, typical
Image Rejection: >50 dB, typical
Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
Weight: 241 g
Housing: Molded ABS
Power Requirements: 12–15 V DC @ 160 mA, supplied by external power supply (tip positive)
BLX2 Handheld Transmitter - Audio Input Level:
gain 0dB: -20 dBV maximum
gain -10dB: -10 dBV maximum
Gain Adjustment Range: 10 dB
RF Transmitter Output: 10 mW, typical, varies by region
Dimensions: 224 mm X 53 mm dia.
Weight: 218 g (without batteries)
Housing: Molded ABS
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
Battery Life: up to 14 hours (alkaline)